EN 
EN
AR
CS
DA
NL
FI
FR
DE
IT
JA
KO
NO
PL
PT
RO
RU
ES
SV
TL
ID
VI
HU
TH
TR
FA
MS
GA
LO
1/2", 3/4" Brass Connection Ball Drip
Automatic Ball Drip Valve When properly installed, the internal ball rests in the lower most area of the valve body allowing for proper drainage of moisture accumulation. Upon system pressurization, the internal ball is “pushed” into the small end of the ball drip body closing the opening. When system pressure is removed, the ball returns to its original position. One of the most common uses is on the dry side of the Fire Department Connection valve. This use helps keep moisture from accumulating inside the Fire Department Connection. Designed for horizontal installation only.
Description
Body: Cast Brass
Ball: Brass
Connection: Straight Connection NPT Both Sides
Automatic Ball Drip Valve 1/2" x 1/2"
Used to drain low point of system between check valve & Fire Department connection.
Automatically seals under pressure.
Must be installed in horizontal position.
Standard Cast Brass
Straight Connection
Specifications
| Model Number | 8511037 |
| Material | Brass Valve |
| Outlet | 1/2", 3/4" male thread |
| Inlet | 1/2" ,3/4" male thread |
| Pressure | 300PSI |
| Others | Special threaded outlets available upon request |
| Handle color | red |
| Keyword | Ball drip |
| Functions | fire department connection |
| Model | 8511037 |
| Usage | used to simplify the installation of sprinkler system pressure gauges |
